BPMWG - IBM, SERIES III MOD 30 THRU 85 TONER
- MSDS: BPMWG
- Manufacturer: IBM CORP
- Product Name: IBM, SERIES III MOD 30 THRU 85 TONER
- National Stock Number: 6850-01-137-8521
Product Identification
Product ID:IBM, SERIES III MOD 30 THRU 85 TONER
MSDS Date:11/16/1989
FSC:6850
NIIN:01-137-8521
MSDS Number: BPMWG
Responsible Party
ARMONK, NY 10504-1709
US
Emergency Phone: 800-IBM-4333
Info Phone: 800-IBM-4333
Cage: 7N876
Contractor
Telephone: 800-426-4333/FAX 214-280-3903
Cage: 30874
Ingredients
ACRYLIC COPOLYMER
CAS: 25608-33-7
PHENYLETHYLENE
CAS: 25119-62-4
POLYMERIZED FATTY ACID AMIDE
CAS: 68650-54-4
MALEATED RESIN
CAS: 8050-28-0
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 12%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION-NON TOXIC.
INGESTION-NON TOXIC. SKIN-NON IRRITATING. EYES-MAY ACT AS A
MECHANICAL IRRITANT. CHRONIC: RARE INDIVIDUALS MAY NOTE A SKIN RASH
WITH REPEATED CONTACT.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION-REMOVE INDIVIDUAL TO FRESH AIR. INGESTION-NO
TREATMENT NEEDED. SKIN-WASH WITH SOAP AND WATER. EYES-FLUSH
COPIOUSLY WITH RUNNING WATER.
Fire Fighting
Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:FIRE MAY PRODUCE HAZARDOUS DECOMPOSITION
PRODUCTS SUCH AS CARBON DIOXIDE, CARBON MONOXIDE. SELF-CONTAINED
BREATHING APPARATUS MAY BE REQUIRED.
Unusual Fire/Explosion Hazard:LIKE MANY FINELY DIVIDED COMBUSTIBLE
MATERIALS, TONER DUST IN HIGH CONCENTRATIONS CAN FORM AN EXPLOSIVE
MIXTURE IN AIR WHICH, IF IGNITED, COULD EXPLODE.
Accidental Release
Spill Release Procedures:CAUTION-MINIMIZE GENERATION OF DUST DURING
CLEANUP. USE OF A VACUUM CLEANER IS PREFERABLE. COLLECT THE MIXTURE
AND PLACE IN A CLOSED CONTAINER.
Neutralizing Agent:NA
Handling
Handling and Storage Precautions:AVOID EXCESSIVE HEAT DURING STORAGE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:NONE, FOR EMERGENCY USE WEAR NIOSH APPROVED
SELF-CONTAINED BREATHING APPARATUS.
Ventilation:NONE
Protective Gloves:NONE
Eye Protection:NONE
Other Protective Equipment:NONE
Work Hygienic Practices:NONE
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:0.9
pH:NA
Viscosity:NA
Evaporation Rate & Reference:NA
Solubility in Water:0
Appearance and Odor:BLACK POWDERY POLYMERIC MATERIAL; SLIGHT ODOR.
Percent Volatiles by Volume:NA
Corrosion Rate:NA
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
NITROGEN OXIDES.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.